Pores Analysis
Author:Yk.peggy
On the basis of former picture used for oil analysis, click the buttons of “Pores Analysis” and
“Analysis” on the right side to make analysis on pores. A picture will be popped up (as shown in the
picture). You need to mark the automatic hollow pore manually. Click the two side of every pore. It
is not necessary to mark all pores. Just mark several typical pores. And then, click “Analysis”. At
this time, the analysis results will be showed in the left corner of “Analysis Result Showcase”. It
includes the description of pore size and pore status. On the basis of this result, relevant product
information will be popped up for your reference. After you finish selection, the system will tell you
successful selection. The interface also will be closed automatically. And then, you can make
another analysis.
If you need to look over former analysis pictures, please look for it in the area of analyzed pictures.
The time will be showed on every picture.
In addition, you can make comparison and 3D comparison at this time.
“Analysis” on the right side to make analysis on pores. A picture will be popped up (as shown in the
picture). You need to mark the automatic hollow pore manually. Click the two side of every pore. It
is not necessary to mark all pores. Just mark several typical pores. And then, click “Analysis”. At
this time, the analysis results will be showed in the left corner of “Analysis Result Showcase”. It
includes the description of pore size and pore status. On the basis of this result, relevant product
information will be popped up for your reference. After you finish selection, the system will tell you
successful selection. The interface also will be closed automatically. And then, you can make
another analysis.
If you need to look over former analysis pictures, please look for it in the area of analyzed pictures.
The time will be showed on every picture.
In addition, you can make comparison and 3D comparison at this time.
没有评论:
发表评论